At 11:14 AM 12/2/2010, Jeff Lincoln wrote:
>OK, does anyone know where I can find a flow chart for the 1.9 cooling
>system. I've seen the 2.1 but can't seem to find the 1.9. I need to
>reinstall the heater lines in Gertie (it's COLD out there) and I want to
>make sure that I'm hooking things to the right spot :).

Fwd end R head to tee to valve to core to tee to pipe that crosses
over the engine.  Don't rip the studs out of the intake runners,
you'd be amazed how easy this is.

>My second question should be easy too - I suspect I have an issue witht he
>wires that go to the Temp II sensor. If I decided to just run all new wire
>to that connector what gauge wire should I use?

VW used 18 AWG.  Goes (white) to ECU pin 2 and (brown/blue) to the
infamous rat's nest on the left head.

Yrs,
d