

| Subject: | Overheating/preservation question. |
| From: | DW |
| Date: | Sun, 12 Dec 2010 14:29:29 -0800 |
Over the Thanksgiving weekend we were heading to Vancouver, B.C. from Seattle. Just south of Everett, I noted some extra "smoke" coming out of the back end of the van (1991 Multivan). I slowed down and moved over to the right hand lane and doing so appeared to have quell what was going on. I drove for a few minutes and watched the temperature gauge move up a little. There was no indication of a fall in the coolant level (no indicator light went on). I put on the heater and it was blowing cold air. I became concerned and then the oil pressure light came on with the buzzer. I immediately pull over and shut off the van. Steam blew forward in front of the van from the rear engine compartment. I checked the coolant expansion tank and it was bone dry! The oil level in the engine however appeared fine. I had the van towed to Zoltan and it is now clear that the head gasket was blown. In addition the thermostat housing was severely melted. I plan on replacing the thermostat housing and due to my love of my van, I plan on replacing with the best possible part (i.e., non-melting aluminum). There are two options I have considered: the GoWesty version (GoWesty<http://www.gowesty.com/ec_view_details.php?id=23281&category_id=79&category_parent_id=>) and the VanCafe version (VanCafe<http://www.van-cafe.com/home/van_1292123629253/page_1191>). Does anyone have any opinions on these? I am fully aware that many of you may have opinions on my decision making process because I did not immediately pull off the road, but please be sensitive to my emotional status -- I have a van that needs significant attention. This does lead to my other question; what should I do about the fact that the coolant level sensor did not respond as it has in the past? I have purchased another sensor, but are there other things that I should also have checked or replaced? I want the cooling system to be the best it can so I am going to replace all coolant hoses and the radiator. I am trying to do the most I can with the budget I have while the engine is out. I really want to be aware of a fall in the coolant level in the future and I would be really thankful if you might provide any sage advice on this issue or others to consider. Thanks, DW
Have something to add on this topic today? Revive this thread in the forum »