The pipes are on the correct (passenger) side of the vehicle but the one
with the kick goes to the outside. The heater hoses should mostly follow
underneath and away from the shift rod.
That bracket can make a good wear point.  How about a pic of the hoses over
the top of the tank and how are the heater hoses going through the frame
member?

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
neil n
Sent: Tuesday, January 04, 2011 1:59 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Installed Long Coolant Pipes Wrong? (Pic)

At the time of install, I was confused.

pic of pipes installed:  http://tinyurl.com/25y9px5

Maybe I'm "seeing" things backwards, but are the pipes on the wrong side of
the vehicle? In Bentley I see the pipe with bent end is on the passenger
side no?

Would there a difference in pipes where they pass over the gas tank?
If so maybe that's why the passenger side pipe is butting up against my gas
tank?

Neil.

--
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engine
s