

| Subject: | Re: 1985 Steel Coolant Pipes and "Air Cooled" 1981 Gas Tank |
| From: | Scott Daniel - Turbovans |
| Date: | Mon, 3 Jan 2011 17:54:05 -0800 |
Hi Neil, now that I think about it ... perhaps an air-cooled vanagon tank is different slightly, than a water-cooled vanagon tank. perhaps they didn't quite anticipate main coolant pipes in very early air-cooled vanagon production, regarding fuel tank fitment. mark drillock ? ----- Original Message ----- From: "Scott Daniel - Turbovans" <scottdaniel@TURBOVANS.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, January 03, 2011 5:39 PM Subject: Re: 1985 Steel Coolant Pipes and "Air Cooled" 1981 Gas Tank > re > Is it possible the early style tank is not meant to be used with the >> WBX pipes. Or, were the long pipes on the diesel a smaller OD? >> > as far as I know, the coolant pipes, whether smaller diameter steel, or > larger OD plastic .. > don't affect how the fuel tank fits. > > Though that is a very good thought and I do wonder if that's your problem > somehow. > > do you have the smaller OD metal pipes in there now ? > > ( btw...not all wbxr's have the larger plastic pipes... > until mid-85 wbxr vanagons had the smaller OD steel pipes ) > > scott > turbovans > > ----- Original Message ----- > From: "craig cowan" <phishman068@GMAIL.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Monday, January 03, 2011 4:20 PM > Subject: Re: 1985 Steel Coolant Pipes and "Air Cooled" 1981 Gas Tank > > >> Diesel pipes are different. >> Diameter? I don't remember. But they are different than WBX pipes. >> >> -Craig >> >> >> On Mon, Jan 3, 2011 at 6:19 PM, neil n <musomuso@gmail.com> wrote: >> >>> Hi all. >>> >>> This is re: my fuel tank filler hole not aligning properly with hole >>> in frame. pic: http://tinyurl.com/2e3ev52 >>> >>> With P-side coolant pipe UN-clamped, tank loosely in place, pushing up >>> on tank moves pipe up. Pipe clamped, I could feel tank up against it. >>> I think the shoulder of valley on tank is pushing on the pipe keeping >>> it from seating high enough. >>> >>> I am almost certain I have the pipes in the correct L/R position. >>> Before I attempt to turn the steel pipe to reposition.... >>> >>> Is it possible the early style tank is not meant to be used with the >>> WBX pipes. Or, were the long pipes on the diesel a smaller OD? >>> >>> I doubt this is the case, as VW changed to WBX in 83.5 and there were >>> diesels during air cooled production, but given that this is a less >>> common engine swap.... >>> >>> TIA, >>> >>> Neil. >>> >>> -- >>> Neil Nicholson '81 VanaJetta 2.0 "Jaco" >>> >>> http://tubaneil.googlepages.com/ >>> >>> >>> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines >>>
Have something to add on this topic today? Revive this thread in the forum »