11 mm head on the brake drums and hydraulic lines and
 throwup bearing sleeve and
 reverse light side cap on the trannys. Early trannies have some internally
too. Bug clutch cable lock nut is an 11..
 Same size actually as a 7/16th SAE(us) bolt..so don't get started on what
metric and sae wrenches are the same too...
Daryl of AA Transaxle
425-788-4070
"On the cutting edge of Old technology"
86 Syncro Westy w/Turbo Zetec in the trunk

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Alistair Bell
Sent: Friday, January 21, 2011 10:20 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: VW Necessity...

aren't they closer to 8 mm?

hold on, that jolted the little pea I call a brain into the right
hole.... It might have been one of those 10mm bolts holding drum onto
axle, PO substituted an 11 (or close imperial equiv)

alistair
On 21-Jan-11, at 10:12 AM, Tom Buese wrote:

> On Jan 21, 2011, at 11:05 AM, Alistair Bell wrote:
>
>> nope, wasn't one of them :)
>>
>> now its bugging me, damn memory!
>
> 11mm on brake fluid bleeders on rear drums?