The oil pressure sending unit is MUCH easier to remove with a deep well 24mm
socket.  Perhaps translate that to "more possible" rather than "easier".

Karl Wolz

  _____

From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Jeff Lincoln
Sent: Wednesday, January 26, 2011 7:55 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Oil leak...

Everyone seems to be missing the fact that it looks like the leak is at the
oil sensor (based on the linked pictures) the oil cooler is not the suspect
anymore. (although those are all good tips for doing that o-ring
replacement).

I have never replaced that sensor before but I hear it can be a bear because
of the tight quarters in there. I think (although I could be wrong) you
might find something about this on ben's website:  http://www.benplace.com/

--
Thanks,

Jeff
'85 GL (Gertie)
'90 Carat (Grover - the noble parts donor)
'86 (We call this one Scrap)
'78 Bus (Melissa) Patty's Bus

  _____

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / Virus Database: 1435/3407 - Release Date: 01/27/11