cool Gregg,
I hope it goes real nicely. It could/should.

minor word of warning about those plastic t-stat housings..the bottom part
..
they melt, warp, and break.
Hopefully yours is fine and not an issue in any way.

which type of coolant do you run ?
Scott
www.turbovans.com

----- Original Message -----
From: "Gregg Carlen" <gregg.carlen@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, February 11, 2011 1:24 PM
Subject: Re: Engine running COLD

> Thanks Scott, et al,
>
> I've got an 87deg thermostat on the way from Bus Depot, so that will go in
> soon. I think I've convinced myself that this is either a stuck-open
> thermostat, or, more likely missing altogether. Soon as I have the new
> thermostat in hand, I'll open the housing and put the new one in.
> Hopefully
> there's no suprises when I open it up.
>
> Thanks for all the advice!
> Gregg
> 90 Westy
> On Fri, Feb 11, 2011 at 1:11 PM, Scott Daniel - Turbovans <
> scottdaniel@turbovans.com> wrote: