Tom -

Thanks for the reply.  There are times I'd rather be in the house once a
week and spend the rest of the week in the garage.

Some hi temp flat black it will be.

Joe

  _____

From: Tom Hargrave [mailto:thargrav@hiwaay.net]
Sent: Tuesday, March 08, 2011 9:47 PM
To: 'Joe Luther'; vanagon@GERRY.VANAGON.COM
Subject: RE: Honing and cylinder painting

Joe,

I see my misquote has started quite a stir on the site. My mind must have
been in other places. But that's OK, I believe that if Women really
understood how most guys minds worked they would keep us in the garage and
let us in the house once a week.

For paint you need flat black and it needs to be able to handle the
temperatures without degrading. My suggestion would be a high temperature
flat black primer.

Thanks, Tom.

From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
Joe Luther
Sent: Tuesday, March 08, 2011 11:36 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Honing and cylinder painting

Tom - thanks for the reply.  What do you consider the "right" paint?
Secondly, is there any other area that should be painted?

Joe

  _____

From: Tom Hargrave [mailto:thargrav@hiwaay.net]
Sent: Tuesday, March 08, 2011 12:26 PM
To: 'Joe Luther'; vanagon@GERRY.VANAGON.COM
Subject: RE: Honing and cylinder painting

The black paint works but you have to use the right paint.

It's like taking 1 step backwards and one step forward. The backward step is
the insulation value of the paint layer & the 2 steps forward are the
increased radiating properties of black verses silver or dull grey. High
efficiency teat sinks are anodized black for the same reason.

Tom Hargrave

www.towercooler.com

From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
Joe Luther
Sent: Tuesday, March 08, 2011 10:25 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Honing and cylinder painting

I've been looking around the web during my lunchtimes for reading material
on rebuilding etc., I found a site called aircooled.net that has some
interesting and detailed information on it.

In particular, I was looking for information on hone stones to be sure I had
the right grade etc being sure of oil application during the process, etc.
I have a Craftsman cylinder hone that I used once some years ago, I do not
recall the stone grade.  Is stone grade critical for light honing of used
but within spec cylinders to seat new rings?

Also, in one document, it is recommended to put a coat of black hi temp
spray paint on the outside of the cylinder fins to aid in cooling.  I always
thought painting a heat transfer surface was akin to adding a layer of
insulation??  Not true?  I didn't plan on painting anything but the brackets
and tin and cast housings etc.

Thanks in advance for comments.

Joe

Technical Manager
Alfons Haar Inc.
150 Advanced Dr.
Springboro, Ohio 45066
937.560.2031 main
937.560.2032 fax
937.560.2037 direct
An ISO 9000:2008 certified organization

  _____

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / Virus Database: 1497/3490 - Release Date: 03/08/11

  _____

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / Virus Database: 1497/3490 - Release Date: 03/08/11