Yes this is my 88 Wolfsburg Automatic.

So what's the best way to check these wires?

(I am not very electrically minded. I do have a volt meter gauge and simple signal checking system. )

The lights are working on the dash, the only thing not working is my Fasten Seatbelt lights but I think that may because the previous owner took out that relay with the buzzer on it. Not sure what part number that is or even what socket that part goes into. Would that have anything to do with it?

When you say PIN 5 on the panel connector are we talking about the thin wiring foil or the fuse area on the back?

Sorry but I think of me a novice when it comes to wiring.

Thanks, David.

Robert
NY

On Mar 15, 2011, at 10:38 PM, David Beierl wrote:

> At 12:24 PM 3/15/2011, Robert Stewart wrote:
>> When I first got my van the digital clock worked. I brought to a
>> mechanic to do some basic repairs before I know anything about the
>> van. When I got it back the clock stopped working.
>>
>> Any ideas on how to fix this?
>>
>> Is there a fuse or any wires in particular to test?
>
> Rob, is it safe to assume this is the '88 Wolfsburg you mentioned in
> some previous post? (hint, hint)
>
> The digital clock is fed from pin 5 of the panel connector, skinny
> red wire which comes from a double connection to pin 7 of radio
> connector T8.  Fat red wire proceeds from there to connector T2c
> (which feeds the inside lights with skinny red wires) and thence to
> fuse/relay panel pin B12 and fuse S3.
>
> Yours,
> David