

| Subject: | Re: Auxilliary batteries |
| From: | Phil Zimmerman |
| Date: | Tue, 15 Mar 2011 13:09:46 -0700 |
Date: Tue, 15 Mar 2011 07:39:26 -0700 Reply-To: mark drillock <mdrillock@COX.NET> I have a simple setup with a 1314 and the 125ah led acid deep cycle. The aux battery sees about 14.5 volts while I am driving. My battery did not experience any loss of water but it did lose at least half of it's rated capacity in less than a year. Whether this problem is due to charging method or simply a poor battery is a question I would like to answer but can't. My current plan is to put in a switched voltage drop to let me reduce the charging voltage on long drives, after some initial period of full voltage to allow fast charging. I plan to use a big diode for the voltage drop. ----------- Hi Mark, Is this the battery mounted in the engine compartment next to the Z-tek engine? If yes, a possible contributing issue to the degraded battery capacity are the higher ambient temps the battery endured? I cannot quote a number but, for temps above ~72F the charge voltage needs to be reduced x-number of volts�. Strange though, I would expect some loss of electrolyte under these elevated ambient temps? Batteries are weird sometimes�. Battery Voodoo! Cool idea for voltage reduction�. diode�. :>) regards Phil Z. '87 Westy Campbell River, BC
Have something to add on this topic today? Revive this thread in the forum »