

| Subject: | Re: Starter Replacment |
| From: | Mark Dearing |
| Date: | Sun, 27 Mar 2011 15:05:46 EDT |
In a message dated 3/26/2011 4:04:57 P.M. Eastern Daylight Time, scottdaniel@TURBOVANS.COM writes: a lift is not 'better' really .....in my opinion. for one thing ..you need to remember to do everything 'up there' ..like topside stuff, first, before you raise it. then you are working with your arms above your head ..not that much fun to me. then if you need to do anything 'up there' ....it's either get a ladder, or lower the van back down. it's really easier to work on it with it a couple feet off the ground .. where you can reach things on top and underneath .. and you work on it laying comfortably on your back with your arms in front of you .. Hey Scott you must be a lot younger than me. getting up off the floor is a heck of a lot harder than working overhead to me. Also after doing a bunch you tend to know what to remove the first time so there wont be any reason for up and down,besides it doesn't take anymore work to raise or lower the lift. also laying on your back your arms are still up above you. Even changing the bushing this job should be under 2 hours, if you know to use a tap to remove the bushing and electric tape on the driver to install it. Syncro vanagon is harder later mark d
Have something to add on this topic today? Revive this thread in the forum »