

| Subject: | Re: Engine analyzer/tach recco? |
| From: | Don Hanson |
| Date: | Thu, 24 Mar 2011 07:31:20 -0700 |
On Thu, Mar 24, 2011 at 12:16 AM, Scott Daniel - Turbovans < scottdaniel@turbovans.com> wrote: > hi ... > not sure what you mean by 'engine analyzer ... > treally important to have I'd say. > > the tools I use to tune waterboxer vanagons - > timing light, > digital voltmeter ...to read oxygen sensor output , for example. > - and to check resistance of Temp II Sensor ...both cold and warm. > many uses. > > those are the two most important ones I can think of right now. > oh .. > 'to me' ..this is a very, very important tool to have ..a remote starter > switch .. > that is more for convenience, such as when checking compression or > adjusting rocker arm screws/hyd lifters. > and also starter circuit diagnosis. > > fuel pressure gauge .. > ultimately, you need one of those too. > > oil pressure gauge some ........but you need a custom made pipe to access > the oil pressure switch location decently. > > I use a timing light to check spark plug wires too. > or a little gizmo you hold against the wire to detect if the spark is > getting through the wire. > > ...an inductive ammeter ..I use mine about once every 5 years ...in full > time vanagon tuning and repair. > > vacuum gauge .. > I use mine about once every 16 years ..if that. > > the two most important ones are digital volt meter and inductive timing > light. > > Scott > www.turbovans.com > > > Don't forget the infared temperature 'gun'...Thermometer. Very handy. Don Hanson
Have something to add on this topic today? Revive this thread in the forum »