Does anybody make an A pillar pod system for several gauges for the
Vanagon or have found one another model that works??

I have a 3 gauge pod mounted on top of the instrument cluster
cover(OP/FP, Vacuum, and WT/OT)  Two toggle switches mounted in front
allow me to flip back and forth between WT/OT on one gauge and FP/OP
on the other, effectively giving me 5 gauges' worth of info for the
price of 3.(plus 2 extra sensors).  I'd like to add an ammeter and
volt meter, but don't want to add moret o the top of the instrument cover.

  For those that can get by with 2 or 43 gauges, I've seen the
multiple gauge opods on ebay pretty reasonably priced.

DM&FS

At 05:47 PM 4/9/2011, Dave Mcneely wrote:
>---- Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM> wrote:
> > either the 0 to 100 psi ( which looks just fine and normal in a vanagon to
> > me )
> > or the 0 to 80 .
> > which I just posted about , including a picture from egauges.com.
> >
> > you defenitely don't want the 0 to 150 psi.
> >
> > I put my OP guage in a single black pod..
> > at the base of the windshield, so it's close to my nomal line of site..
> > and just to the right of the instument cluster means that 3 wires only have
> > to sneak from the instrument cluster right side to the guage ..just a few
> > inches away.
> >
> > that is far easier than making a panel, or buying one, with round holes
> > already in it ..
> > mounting it on top of or under the dash, etc.
>
>My gauge is mounted in the dash, under the radio, near the
>floor.  Works for me, but is not line of sight, by any means.  mcneely