At 12:25 PM 4/16/2011, neil n wrote:
>How does one torque the big inner "nut" to rack? I imagine most go by feel.

Bentley shows it being done with an open-end wrench, at the same time
they say "...torque to 51 lb-ft."  But what you need is an open-end
crowfoot wrench which you attach to your torque wrench and then apply
a formula to correct the torque.

Calculator is here:
http://www.engineersedge.com/manufacturing_spec/torque_wrench_1.htm

Yrs,
d