Though slow, the brake system will "gravity bleed". I assume the
clutch line would do the same.

Sometimes the vacuum type bleeder will suck air in between valve and
body threads causing bubbles to show up and lower vacuum.

Please keep us posted on rebuild kit effectiveness.

Neil.

On Sat, Apr 30, 2011 at 9:07 AM, Paul <wognacious@gmail.com> wrote:

> Well it turned out to be the slave cylinder, bought a rebuild kit and so far
> so good. The only problem I had was bleeding the darn line by myself. I have
> a vacuum pump, and used it before successfully, but this time I must had
> leak in the system. So I left the rear end up on jack stands overnight and
> the next day when I got home from work the system had bled itself. Took the
> bleeder valve completely out and to my surprise fluid was leaking out. Being
> a doubting Thomas I went up front and gave the peddle a few pushes and could
> hear fluid dripping into the catch basin I had below the unit. Tightened
> everything up and topped of the fluid and off I went.
> Thanks to all that chimed in.
> Paul
> 85WWW, who coined that one?
>

--
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines