On Tue, 2011-05-10 at 14:59 -0700, Scott Daniel - Turbovans wrote:
>
>
> that lock nut adjustment is goofy.
> Jeff Stewart recently asked how to undo that ..
> and he called it a cable even though it's a rod too.
>
> you either remove the throttle body from the plenum, and rotate the
> whole throttle body to screw or unscrew in the rod,
> OR you push that spring back on the end and undo the clip there ..
> both ways are a hassle to do.

As I've found. I can't figure out how to shove the spring back onto the
adjusting rod far enough to snap the circlip back on. Any help would be
greatly appreciated.

--
Rocky J Squirrel