

| Subject: | Re: Lockers -- how hard to install LLSD? |
| From: | Scott Daniel - Turbovans |
| Date: | Tue, 10 May 2011 17:24:43 -0700 |
did you see my post about the 'parking brake trick' for a faux or semi limited slip, when stuck with one rear wheel spinning ? ----- Original Message ----- From: "Rocket J Squirrel" <camping.elliott@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, May 10, 2011 4:53 PM Subject: Re: Lockers -- how hard to install LLSD? > Yeah, well, if I put a winch on the front of the van, I'd get stuck in a > place where the only tree is behind me. > > My main plan to avoid getting stuck any more is to (A) be more > thoughtful about where I go, and (2) get that Peloquin differential. > > If I do get stuck, I will then try to use the hi-lift with a lift-mate > to hoist up the tires and ram grabby things under them, like carpet or > porkypines or whatever I can get my mitts on and see if I can get > rolling. If that fails, then I'll winch the damn thing with the hi-lift. > That as a lesson for my poor judgment. > > Truth be told, only one time of the three I got stuck last year was > there anything like a tree nearby. The other two times I'd have needed a > pull-pal or similar, a spendy item. > > I'm thinking a deflated blimp packed atop the poptop and small hydrogen > generator will be my eventual solution. > -- > Rocky J Squirrel > > > > On Tue, 2011-05-10 at 14:32 -0700, Jeffrey Vickers wrote: > >> Hey Rocky, >> >> Before you get a Hi-Lift you might want to try one. They are not the >> easiest device to use and they are insanely dangerous if you screw up >> and the handle whacks you in the face. I prefer a good bottle jack and >> foot-long sections of Trex decking (not wood) underneath the jack. >> >> If you are getting stuck in deep sand and want a tall jack to get out, >> there are alternatives. If you are thinking that the HiLift would make >> a good winch, I would recommend either buying an actual winch or >> something like a Black Rat hand winch: >> http://www.expeditionswest.com/equipment/general_equipment/black_rat_winch.htm >> . Using the HiLift as a winch is a slow and painful process. There >> are also 12V winches that are hand-mounted to either the front or rear >> of your vehicle as needed - instead of having it bolted to the front. >> Strips of carpet work wonders in soft sand as well. >> >> Getting unstuck depends on a variety of circumstances - what you are >> stuck in and what's nearby can be a big factor. If you travel alone >> (one van) in wooded areas, a winch -either mounted or portable - might >> be your best friend. >> >> cheers, >> Jeff In Marin >> >> >> On May 10, 2011, at 12:35 PM, Automatic digest processor wrote: >> >> > Date: Tue, 10 May 2011 08:15:36 -0700 >> > From: Rocket J Squirrel <camping.elliott@GMAIL.COM> >> > Subject: Re: Lockers -- how hard to install LLSD? >> > >> > Okay, fine. Yinz* have talked me into it. I'm-a gonna have the tranny >> > pulled and hauled over to German Transaxle to have the stock auto >> > trans >> > differential replaced with a Peloquin torque biasing diff. That, >> > plus a >> > Hi-Lift jack, a bunch of other recovery bits, and a lot of studying of >> > this video I just got, "Getting Unstuck with Bill Burke," and I >> > might be >> > able to avoid the messy and embarrassing pickles I got myself into >> > last >> > year.
Have something to add on this topic today? Revive this thread in the forum »