You stare at that torch for a while and you'll get a haddock.  Trout yer
head.

Karl Wolz

  _____

From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Scott Daniel - Turbovans
Sent: Wednesday, May 11, 2011 7:48 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Front end suspension

"tack welded the new parts just for the halibut"

cute ..
must mean 'for he hell of it' .
like it.

----- Original Message -----
From: "neil n" <musomuso@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, May 11, 2011 7:25 PM
Subject: Re: Front end suspension

I just recently installed Febi bushings. The body had two different
OD's. My guess is that the smaller OD lets you line it up in arm so
you stand a better chance of pressing them in straight.

I pressed old parts out and new in, with vice, piece of exhaust pipe
and steel plate to back up part and pipe. Pic of old Meyle removed:
http://tinyurl.com/3d7kkat  I think a vice jaw pressing on part
deformed it. Pretty sure that's not what it looked like new. Pic of
old part tack welded to arm: http://tinyurl.com/3lbotjr  not saying
it's needed, but pic should show how small and how little actual weld
may be needed.

Of the Meyle and Febi I removed only one pair had the tack welds IIRC.
Neither were turning in the arm AFAIK.

I have a MIG so tack welded the new parts just for the halibut, but
when pressed in, they seemed pretty tight to the arm.

These being the observations of a first timer install.    ;)

Neil.

On Wed, May 11, 2011 at 3:29 PM, Karl Wolz <wolzphoto@q.com> wrote:

> I have about 300,000 miles on my Westy with the bushings NOT spot welded -
> no problems. Some say it must be done; some say not needed (this ought to
> start a war).

--
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engine
s

  _____

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1321 / Virus Database: 1500/3632 - Release Date: 05/11/11