I had the top mounting bolt of my rear shock a little loose for a long
time.  I looked and looked, pushing and prying on stuff under there.  I
found it when I had the wheel off...The top shock mounts at the rear take a
pretty big torque to  tighten properly..at least given my shocks and mounts.
  Don Hanson

On Mon, May 9, 2011 at 6:21 AM, Jim Felder <jim.felder@gmail.com> wrote:

> I had a terrible time tracking down a clunking that turned out to be worn
> brake shoes. Replacing the shoes made the problem go away. This was after
> two different shops looked through the brake components to try to find it.
> Upon examination it didn't look like anything was wrong, but it just made
> sense since nothing else was loose that the only moving parts in the
> assembly�the shoes�must have been making the clunk, and they were.
>
> As Dennis says, the loose nut is fatal so check for that first, then the
> backing plate. If not those nor the CV, it's probably the shoes.
>
> Jim
>
>