Go with David's measurements. I recall that it needed some convincing
to get all the bolts in but eventually they did. i will go out tonight
and try to measure

Karl

On Tuesday, May 24, 2011, BenT Syncro <syncro@gmail.com> wrote:
> Interesting differences. David's measurement of his hitch adapter is markably different from the one on the website that Karl referenced below. Which one is correct for the SA hitch? I bought a standard bolt on tow ball and it is immediately apparent that the holes are too far apart. Here's what I gathered:
> 3 3/8" �or �85.725mm (from Karl's link)3 3/4" �or �95.500mm (David's meas.)
> 1 3/4" �or �44.450mm (from Karl's link)2 1/4" �or �57.150mm (my calculation)�� � � � � � � �57.125mm (David's measure�� � � � � � � �58.128mm � � � � � � � � ments)
>
>
> Regards,
> BenT
>
>
>
> On May 24, 2011, at 12:05 PM, Karl Ploessl <karl.ploessl@gmail.com> wrote:
>
> years ago I got the following which I could mount onto the SA hitch
> (one of the last ones from Busdepot):
>
> http://coolfj40.stores.yahoo.net/hirefj.html
>
>
> Karl.
>
> On Tue, May 24, 2011 at 3:04 AM, BenT Syncro <syncro@gmail.com> wrote:
> Does anyone know where I can get either a receiver adapter or a towball/hook for the SA tow hitch? I bought one and did not get the hook with it.
>
> Alternatively, can anyone tell me the spacing of the holes? I'd measure them myself but the hitch is 100 miles away from where I am at the moment.
>
>
>
> TIA,
>
> BenT
>
>