Date:         Thu, 26 May 2011 16:18:29 -0600
Reply-To:     Richard A Jones <Jones@COLORADO.EDU>

The nut on the rod that adjusts the parking brake is
frozen.  I've tried Kroil soaking and heating with a
propane torch, but I can;t move it--either tighter or
looser.

It looks like a Nylock nut by the shape.
Any suggestions?  This is on an '87 Syncro, so the
skid rails and prop shaft are in the way.
Richard
-----------
Richard,
Sorry to hear of the frozen nut on your parking brake.

Perhaps try a nut-splitter to remove the stuck nut.
Run a re-threading die down the rod and install a new nut�
Your good to go�.

This assumes you have a nut-splitter and the appropriate re-threading die�
If not, drive over to John's and bug him� he prolly has these tools!

regards

Phil Z.
On a rock off the West Coast