Thanks, Jeff. I wanted to look at that diagram of the cooling setup. The
Gowesty external ATF cooler kit has you attaching the two ends of the
now-unused coolant hoses together and they are presently dangling down
next to the transaxle in an unattractive and sloppy way. In order to
simplify the setup* I thought I might just remove them and cap them off
with some kind of cap which I have not yet figured out.**

The diagram shows that I would not be removing some important coolant
path. Since there is no separate drawing for the manual transmission
cooling system for the same years I bet that using a little White-Out on
the diagram  on 19.10 to remove the ATF loop would result in the cooling
diagram for the manual transmission version.

===============
* Simpler is better. In the face of a zombie attack one does not need to
deal with superannuated hoses.

** Suggestions for this?

--
Rocky J Squirrel

On Thu, 2011-05-26 at 23:24 -0700, Jeff Schwaia wrote:
> You can try this one:
>
> http://www.vanagonparts.com/cooling_refill.html
>
> It's kind of Vanagon generic.
>
> Cheers,
>
> Jeff
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Rocket J Squirrel
> Sent: Thursday, May 26, 2011 10:53 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Anything like this for 1.9L?
>
> Looking for a diagram like this but for the 1.9L Vanagon:
>
> <http://www.benplace.com/cooling_system_flow.htm>
>
> -- RJS
> (Reference to the imminent zombie apocalypse have been removed from this
> sig for reasons of politeness)
>