

| Subject: | Re: Can this do that? |
| From: | Dave Mcneely |
| Date: | Sun, 22 May 2011 20:00:30 -0500 |
My 2.1 with the tencentlife oil cooler takes one quart more than it did before to fill it to 3/4 above the lower mark, which is my usual filling point. DMc ---- Edward Maglott <emaglott3@GMAIL.COM> wrote: > So you added a quart and then how much more? This oil cooler sounds > like it adds quite a bit of capacity to the oil system. Seems like > the guy who made it would know exactly how much. > > Edward > > At 07:09 PM 5/22/2011, Rocket J Squirrel wrote: > >I just installed tencentlife's external oil cooler kit. The instructions > >were to then start the engine, wait for the oil pressure lamp to go out, > >then shut it off and top off the oil. > > > >The oil pressure lamp never came on, so I let the engine run and idle a > >few moments, then shut it off. > > > >Is there a way to test the oil pressure lamp? > > > >I check the oil level and before we started the work, the oil was just > >above the lower notch on the dipstick. Now it was off the bottom end. So > >I put in a quart and re-started the engine. > > > >It sounded like crap. Couldn't hold a idle, rattled like drained down > >hydraulic lifters. Shut it off, check oil level. Still below the > >dipstick, added more, restarted. Could barely idle. There were gulping > >sounds coming out of the oil filler neck. > > > >Shut off, add more oil now it's above the lower notch and idling and > >sounding fine. -- David McNeely
Have something to add on this topic today? Revive this thread in the forum »