Where can I buy or how can I make the tee between the warm up
(auxiliary) air regulator and manifold where the small connection had a
restriction in it.

John

On Mon, 2011-05-30 at 19:55 -0400, Dennis Haynes wrote:
> Keep the hard plastic tubing as it lasts forever and don't bother with the cloth covered stuff. I believe 7/64 standard vacuum tubing is the correct size. For the tee between the warm up (auxiliary) air regulator and manifold the small connection had a restrictor in it. I don't remember the size but it is important as it meters air from the tank vapor recovery system.
>
> Dennis
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of John Lauterbach
> Sent: Monday, May 30, 2011 4:36 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: sources for small vacuum tubing and fittings
>
> Following-up on suggestion that I had a vacuum leak, I found several suspect pieces of tubing and connectors.  My engine has combination of rubber/cloth vacuum tubing and hard plastic vacuum tubing.  Can I go with the rubber/cloth vacuum tubing -- looks like 3 mm ID.
>
> Another suspect point was a fitting that connect a small diameter hard plastic tube with the tube coming from the axillary air regulator and the outlet end of the connector goes to the intake manifold.  Where can I get the connector?  I had dummied up a connector many years ago and I think it has sprung a leak
>
> Engine in 1.9L in 1984 Vanagon
>
> Thank you,
>
> John