The only thing I would add is be very careful with the front corners.  There isn't a lot of room to get the bottom middle most screws in.  On both sides, I managed to pinch the fabric under the screw head, so when I opened the canvas after I was done, Rippppp.  :>{  Takes away from the whole feeling of accomplishment.  I think the top corners can also rip if you are not careful checking tension the first time.  It would help to have someone open the canvas slowly while you look for tight spots.

--- On Tue, 6/14/11, Jamie Fitterer <fittdog8848@HOTMAIL.COM> wrote:

> From: Jamie Fitterer <fittdog8848@HOTMAIL.COM>
> Subject: Replacing Canvas on Westy
> To: vanagon@GERRY.VANAGON.COM
> Date: Tuesday, June 14, 2011, 8:37 AM
> Hey guys/gals,
>  
> I was looking through the archives for a vide othat I saw
> last year.� It was taken at a Van gethering of a
> gentlemen showing how to Change teh Pop top Tent without
> taking off the top.���IT was very
> informational and showed where to cut the corners to get it
> to fit on right the first time.� 
>  
> If any of you have teh link for that I would appreciate it.
> 
>  
>  
> Thanks,� � � � � � �
> � � � � � � � �
> � � � � ���