3M Weatherstrip adhesive.

that is 'the stuff' to use in my experience and opinion.
it works 'exactly' like you want it to.
engine temp there is not a problem.

Scott
----- Original Message -----
From: "Cecil Eastman" <ckelmo1@COMCAST.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, June 23, 2011 6:25 PM
Subject: Proper adhesive for engine compartment seal

Finally scored a new seal for the engine compartment.  One long piece of
extruded rubber.  I have to assume that there's something that holds it in
place.  What's the proper type of adhesive for this application?  Are there
special considerations regarding engine heat here?

Thanks,
Cecil
'85 Westy Wolfsburg
"Der BrotKasten"=