

| Subject: | Re: oil additive to clean engine |
| From: | Todd.Last |
| Date: | Sun, 3 Jul 2011 17:50:50 -0700 |
IPA means Isopropyl alcohol in some circles. So your beer comment may not be that far off. :-) On 5/19/2011 11:36 PM, Karl Wolz wrote: > SeaFoam MSDS content section > > Pale Oil 64742-54-7 40.00 - 60.00 N/Av>15000 mg/kg>5000 mg/kg > > Naphtha 64742-49-0 25.00 - 35.00 N/Av>5000 mg/kg N/Av > > IPA 67-63-0 10.00 - 20.00 17000ppm 4720mg/kg 12890mg/kg > > > > I dunno what IPA is, other than good beer. > > > Karl Wolz > > > > > _____ > > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > tom ring > Sent: Thursday, May 19, 2011 7:18 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: oil additive to clean engine > > > > SeaFoam is, from what I've heard from a talk show car fixit friend of mine, > a > mixture of one of the good alcohols as well as some petroleum solvents and > maybe more. Whatever is in it it does well in the fuel side of the system > dissolving carbon and hydrocarbon deposits and binding h2o without titrating > out. It also seems to work well as a just before end of oil change > additive. > > Put in what is appropriate based on how far your down on the dipstick you > are > plus OK to use excess capacity your system can handle (research your oil > system). > > I don't know what is allowable on a 1.9 waterboxer, so if I was to use any > oil > system solvent I would look at the dipstick and then drain a bit of oil if > needed to make room for what the solvent maker suggests is appropriate. > > Whew! Way too long. > > I use it before an oil change every 25K or so, and use it in the suck-it- > through-the-vacuum-line carbon dissolver mode about every 50K. > > I've been using SeaFoam for a couple decades (+) and seen no issues and some > apparent good. Which is a pretty meaningless sample of one from a biased > user. > > tom > > > On 19 May 2011 at 21:28, Edward Maglott wrote: > >> My ol wasserboxer has its share of lifter noise. Especially as I >> reach the end of the 3000 mile oil change interval using castrol >> 20w50 and mahle filters. I was wondering, as I approach the next oil >> change in a few hundred miles, if I might add something to the oil to >> help clean the engine internals a bit without causing trouble. I've >> heard SeaFoam and Marvel Mystery Oil mentioned on this list in the >> past. any recommendations? I'm thinking a one time treatment here. >> >> Thanks, >> Edward >> > > _____ > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1321 / Virus Database: 1509/3647 - Release Date: 05/19/11 >
Have something to add on this topic today? Revive this thread in the forum »