

| Subject: | Re: Starting issue - low idle and wants to stall |
| From: | Dennis Haynes |
| Date: | Tue, 5 Jul 2011 00:45:16 -0400 |
You don't need an adjustment. You need diagnosis and repair. For some reason the idle speed valve is not boosting the idle or giving a cold start fast idle. Probably also means no power steering or AC idle boost. Possible culprits: Bad valve or controller. Bad input to controller. Temp 2 sensor shared with ECU. Check connections and grounds. Closed throttle switch. It is also possible that you have an engine or injector issue that the idle stabilizer cannot compensate for. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Robert Stewart Sent: Saturday, July 02, 2011 1:39 PM To: vanagon@GERRY.VANAGON.COM Subject: Starting issue - low idle and wants to stall RE: 88 auto wolfsburg edition, Engine rebuilt with 5,000 miles on it. So my van has had this issue for while now and I am not sure how to resolve it. When I start the van I have to apply a little gas to the pedal otherwise it will stall on startup. Once warm it idles nicely at around 850-900rpms. What kind of adjustment needs to be made to prevent these startup stalls? Also I noticed that sometimes when I press the gas at a stop light it might hesitate for a second before accelerating. What is that issue? I have not changed the fuel filter in about 2 years. I tried but the releasing bolt seems to not want to open past a certain point so replacement is on hold till I resolve this issue. Thanks, Robert Bloomingburg NY
Have something to add on this topic today? Revive this thread in the forum »