It's a 1982 Federal modeln wiuth new engine last year.  I'm starting
to think I may have to build my own piece(s).  Here's a link to some
of the SS parts I might start with.
http://www.rockymountainwesty.com/Fabrication_Parts_s/103.htm

Then I'd still need the exhaust flanges that connect the crossover to
the heater boxes.    Hmmm.  The fun we have...............   Sources
for these flanges anyone?

BTW, my van is a 1982 which means it's 30 years old next year.
Although on the manufacture sticker by the gas tank filler hole reads:
 Manufacture date: 09/81.  Making the pre-westy shell 30 this
September.

Ken Wyatt
82 westy

On Tue, Jul 5, 2011 at 11:29 AM, Old Volks Home <oldvolkshome@gmail.com> wrote:
> There are two different crossover pipes used, a California Model and a
> Federal Model. �Need to know that to get the RIGHT one.
>
> Once you know that fact, contact:
>
> Derek @ Way Out Salvage in Kingston AR
> http://www.wayoutsalvage.com/
> 479 665 4126
>
> or
>
> Jan Blair @ Blair & Sons, Phoenix, AZ
> 602 243 1238
>
>
> --
> Jim Thompson
> 84 GL 1.9 "Gloria"
> 84 Westfalia 2.1 "Ole Putt"
> 72 411 Station Wagon "Pug"
> 75 914 1.8 "Nancy"
> Full Timing Since March 1999
> oldvolkshome@gmail.com
> http://www.oldvolkshome.com
> ***********************************
> Both places should be able to help, but remember, these pieces are
> getting REAL hard to find these days.
>
>
> On Tue, Jul 5, 2011 at 8:19 AM, Ken Wyatt <57skibum@gmail.com> wrote:
>> Greeting vanagonauts,
>>
>> In my quest to register my 82 westy with adequate emissions, I'm
>> beginning to realize I may need some of the exhaust system parts that
>> are NLA from VW. (IE the cossover pipe). � Does anyone know a place
>> that could make the �custom crossover pipe or know where I might
>> acquire a suitable set up. � Here in Salt Lake I can't use the ones
>> available online because they don't accept a Catalytic converter and
>> that's required here to register.
>>
>> TIA,
>> Ken
>> 82 westy
>> SLC, UT
>