Do you still have the solenoids or did you install the idle speed controller
and valve for the Digifant? If so you need to find the wire that parallel
connects to the compressor clutch.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Karl Wolz
Sent: Monday, July 18, 2011 5:16 PM
To: vanagon@GERRY.VANAGON.COM
Subject: AC idle enrichment circuit

... or some such thing.

AC's installed and functioning.  This is in an '85 with a 2.1L and digifant
system.  IIRC, when it had the 1.9L, there was a switch that raised the idle
if the AC was engaged.  There was a connector with a brown wire that ran
from the compressor to soemwhere (I believe the same route as the power
steering override).  How do I wire up the compressor to raise the idle now?

TIA,

Karl Wolz