

| Subject: | Re: Big brake kit question for `87 Syncro |
| From: | Mike Miller |
| Date: | Thu, 28 Jul 2011 14:38:16 -0700 |
I did the homebrew bit. Considerably more than $200 in parts. Like $700 if you count the machining. Mike On Jul 28, 2011, at 1:50 PM, craig cowan wrote: > Especially on a syncro, why not just home brew the conversion? I > hear that > it can be done for about $200 in acquired parts and there is a > listing on > david marshall's website of what's needed. > > This is what I plan to do. Has anyone done this and has positive > things to > say? > > -Craig > > > On Thu, Jul 28, 2011 at 3:57 PM, BenT Syncro <syncro@gmail.com> wrote: > >> Kim, >> >> Overland is selling the 288 rotors. I was told personally that they >> commissioned their manufacture. Looks like A6 rotors to me. >> >> >> BenT >> >> sent from my electronic leash >> >> On Jul 28, 2011, at 12:48 PM, Kim Brennan <kimbrennan@mac.com> wrote: >> >>> As Ben indicates, the SA parts used to come from Overland. >>> However, I'm >> not positive that the Audi rotors are the same dimensions as the SA >> rotors. >>> >>> Van-Cafe listed them as different sizes. 275mm versus 288 >>> >>> >>> On Jul 28, 2011, at 3:25 PM, BenT Syncro wrote: >>> >>>> Chances are, those are big brake kits from Overland. They >>>> originally >> sold kits from the South African T3's. Later, supposedly made their >> own >> carrier and used Audi calipers. Rotors are SA T3 or Audi. Pads >> Merkur for >> the early (sans wear sensor) and Audi on the later versions. >>>> >>>> GW does have great customer service but probably not the lowest >>>> prices. >> A guy local to me was advertising kits at $600. Less for Syncros >> because >> they don't need new hubs. >>>> >>>> >>>> BenT >>>> >>>> sent from my electronic leash >>>> >>>> On Jul 28, 2011, at 11:58 AM, Mark Tuovinen >>>> <aksyncronaut@GMAIL.COM> >> wrote: >>>> >>>>> I am looking for input from any that are familiar with the "Big >>>>> Brake" >> kit >>>>> that Go-Westy sells supposedly from SA parts as a direct bolt on >>>>> for >> our `87 >>>>> Westy Syncro. I already have 15" SA alloys so clearance is not a >> problem. >>>>> I need to do the front brakes soon anyway so part of the cost >>>>> would be >>>>> absorbed and I came across someone local to me that has a never >> installed >>>>> kit for sale that I am considering making them an offer on. >>>>> >>>>> My concern is down the road when it needs new pads, rotors, or >>>>> calipers >> how >>>>> easy or hard will they be to find? Stock brake parts are readily >> available >>>>> but what about SA brake parts? >>>>> >>>>> Any one have knowledge on this subject? >>>>> >>>>> TIA >>>>> >>>>> Mark in AK >>>>> `87 Westy Syncro >>> >>
Have something to add on this topic today? Revive this thread in the forum »