I'm working on a response to John's need for the whole high pressure hose.
I have some of those. ..
just need to check my inventory  , etc.

Scott
www.turbovans.com

----- Original Message -----
From: "John Rodgers" <inua@CHARTER.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, July 30, 2011 1:28 PM
Subject: Re: PS High Pressure ling w/Banjo Fitting Needed

>  Karl,
>
> It's the small fitting. The one that has the pressure switch on the end
> of the banjo, The hose has a swaged fitting on the opposite end from the
> banjo and fastens by a nut to the tubing going forward.
>
> John
>
> John Rodgers
> Clayartist and Moldmaker
> 88'GL VW Bus Driver
> Chelsea, AL
> Http://www.moldhaus.com
>
>
> On 7/30/2011 2:09 PM, Karl Wolz wrote:
>> IIRC, there are two banjo fittings on the PS pump, one a bit larger than
>> the
>> other.  Do you know which one you need?  I think I have one, perhaps
>> both.
>>
>> Karl Wolz
>>
>>
>>
>> |-----Original Message-----
>> |From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]
>> |On Behalf Of John Rodgers
>> |Sent: Saturday, July 30, 2011 11:44 AM
>> |To: vanagon@GERRY.VANAGON.COM
>> |Subject: PS High Pressure ling w/Banjo Fitting Needed
>> |
>> |  Got ready to install a new PS pump on my '88GL restoration
>> |project and discovered the above part is missing.
>> |
>> |Anyone got a spare?
>> |
>> |Thanks,
>> |
>> |John
>> |
>> |--
>> |John Rodgers
>> |Clayartist and Moldmaker
>> |88'GL VW Bus Driver
>> |Chelsea, AL
>> |Http://www.moldhaus.com
>> |-----
>> |No virus found in this message.
>> |Checked by AVG - www.avg.com
>> |Version: 10.0.1390 / Virus Database: 1518/3798 - Release Date:
>> |07/30/11
>>
>>
>>