Bob, great photos.  This is all that has to be done to most all power window motors.  I have always been able to rebuild these motors, never had to replace one - yet !  I will add one small note, in the bottom of the motor are two small rubber plugs, they should be removed to allow and water that gets in the motor to drain out !  One more place among hundreds that the VW rubber plug guy plugged the drain hole that the VW drain hole guy made - go figure !   AND, FLUID FILM or WURTH FILM used here is indispensable in protecting your rebuilt motor for the future.

On 2011-08-05, at 12:00 AM, Automatic digest processor wrote:

> It is possible to rebuild your motors. If your bottom window scrapers are
> old and brittle, water gets to the top of the motor and rusts the shaft in
> the bearing. I have done mine and brought them back to life. Here are
> pictures of the motor apart:
> https://picasaweb.google.com/105360327576046742860/WindowMotor

Cheers,    

Frank Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains (Collection for sale)
Frank Condelli & Associates - Vanagon/Vanagon Westfalia Service in the Ottawa Valley
Vanagon Stainless Steel Exhaust Systems
BusFusion a VW Camper camping event, Almonte, ON, June 09 ~ 12, 2011