The 2 WD rotors are casting and the full piece is part of its strength.
There is no way that I would machine off the disc and then use the center
remains as the only wheel support.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
craig cowan
Sent: Wednesday, August 10, 2011 7:30 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Eurospec "Big Brake" kit.

You can make your own. It's just quite a bit harder on a 2wd as you have to
machine the rotors down to hubs and build a more elaborate spacer for the
modified carrier.
It's been done. There are posts on thesamba on how. You will save quite a
bit.

-Craig

On Wed, Aug 10, 2011 at 6:33 PM, Kim Brennan <kimbrennan@mac.com> wrote:

> Looks like the South African parts (especially with that part number).
> I'd call them to verify that they actually have that in stock.
>
> On Aug 10, 2011, at 12:24 AM, Troy wrote:
>
> > Can anyone tell me about the big brake kit from Eurospec, as seen here:
> http://www.eurospecsport.com/products/Vanagon/Vanagon%20Page.html
> >
> > Is this a kit similar to what Van Cafe' sells?  Looking for
> > something
> that's fairly easy to install, but don't want to spend $1000 that Go
> Westy charges. I have a 2wd 89 btw...
> >
> > TIA,
> >
> > Troy
>