These are the Bosch 09180 wires.  Originally for 83.5-84 Wassers, they
modified the connectors at the distributor end to work with both the
03010 (non pin) and 03212 (as well as the 03214) distributor caps.

Airhead sells 'em:
http://www.airheadparts.com/vintage-vw-parts/ignition-wire-set/ignition-wire-set-bosch-09180

The advantage of the pin-only style wires is there are resistor
supressors on the connectors to the distributor cap as well as at the
spark plug ends (Bosch 09272 wire set or 200 998 031 D wire set).
--
Jim Thompson
84 GL 1.9 "Gloria"
84 Westfalia 2.1 "Ole Putt"
72 411 Station Wagon "Pug"
75 914 1.8 "Nancy"
Full Timing Since March 1999
oldvolkshome@gmail.com
http://www.oldvolkshome.com
***********************************
On Wed, Aug 10, 2011 at 7:20 PM, Karl Mullendore
<tdiguru@westyventures.com> wrote:
> IIRC, at one point Bosch was making plug wire sets with an end connector
> that would work with both cap types. It had the normal 'old style' end that
> clips in place but the center of the clip had an extra part that would also
> grab the threaded post of the 'new' style caps. Is this perhaps what was
> supplied and you might not have noticed?
>
> Karl