Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Refrigerator lighting
From:Alistair Bell
Date:Wed, 31 Aug 2011 12:31:23 -0700

I have had, in the past, similar prolems. But on recent trip where temps ranged the mid 30's during day and 2 C at night (yes, cold but very dry mornings) and up to 5,000 ft alt. the fridge worked like a champ, staying lit and working very well in those conditions.

I can't explain why it is working so well now.. I had cleaned every part of the system a few times over the years, the last time was last summer.

alistair

On 2011-08-31, at 12:14 PM, neil n wrote:

> A similar thing would happen to me. I'd arrive to camp, fridge
> running. The flame would go out at night. Theory: cooler ambient
> temps, thermostat remains in same position, flame goes to smaller
> mode, not enough air coming in, flame goes out. Restarting in the
> morning was a huge pain involving copious amounts of pumping air pump
> to keep flame alive.
> 
> I think the bigger reason for hard start in morning was that the air
> in, exhaust out cycle was harder to initiate. Normally I fire up my
> fridge on AC at home. This helps start the rise of hotter air in
> exhaust flue. Lighting fridge on LP then becomes easier. As I drive,
> I'm on DC. This accomplishes the same thing AFAIK so when in arriving
> in camp, fridge lights no problem.
> 
> There is information on the burner jet orifice. IIRC there's one
> designed for high altitude use. It has a different size orifice.
> 
> Neil.
> 
> On Wed, Aug 31, 2011 at 11:57 AM, Steven Johnson <sjohnso2000@gmail.com> wrote:
>> Well, at a campout in the mid to late 90's we were near Mammoth Lakes, CA at
>> altitude of about 7K - 8K feet and I lit up the fridge as I
>> normally do and came back later to find the flame had gone out.   Long story
>> short, I was able to get it re-lit with the fuel dial all the way
>> down (counter-clockwise).  I left it there and slowly turned it up over
>> time.   My theory was that with the thinner air it needed less fuel
>> and the burner needed to warm up.   I have to assume that the intake and
>> exhaust for your burn mixture are a clear.  (okay so I didn't
>> read your whole request)...
>> 
>> Steven
>> 91 Westy
>> 
>> 
> 
> -- 
> Neil n
> 
> 65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp
> 
> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
> 
> Vanagon VAG Gas I4/VR Swap Google Group:
> 
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines