I hate to ask, but your VOM is set to the correct range?

Hard to imagine seeing 15 VDC however.

My analogue clock is supplied by B+  (no voltage regulator involved)
so voltage at clock should be the same or close to voltage at battery.

Check what voltage you see at the + connection of the 14 pt connector
to cluster. If you see battery voltage there, then maybe it's a ground
issue?

Neil.

On Wed, Aug 31, 2011 at 1:34 PM, HotelWestfalia <zolo@foxinternet.net> wrote:
> Hi to all,
>
> Yes, 1.5 Volts only. �It supposed to be much higher, like about 10 at least, if not 12.
> What to do? �Anyone?
>
> Zoltan
>

-- 
Neil n

65 kb image Myford Ready For Assembly �http://tinyurl.com/64sx4rp

'81 VanaJetta 2.0 "Jaco" �http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines