Hi all.

Just double checking.

I'm finally getting around to installing a VSS sensor from a Mk2 VW
(in speedometer). It appears to be the same or very similar to the
Vanagon cruise control inductive pickup.

Does this part sit on top of the back of speedometer or push further
into the hole?

These images seem to show it sitting on top of the plastic:

image of it installed on some other type of VW:

http://www.angrymods.com/projects/scirocco/cruise_control/speed_signal_out.jpg

Installed on Vanagon speedometer:

http://images.thesamba.com/vw/gallery/pix/461683.jpg

Or does it push further into the hole? e.g. ears where screws pass
through push past face of black plastic?

It would take a little effort to push it in, so am thinking it sits on
the black plastic.

Thanks much,

Neil.

-- 
Neil n

65 kb image Myford Ready For Assembly �http://tinyurl.com/64sx4rp

'81 VanaJetta 2.0 "Jaco" �http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines