please forgive those who may not have caught that one.

----- Original Message -----
From: "mark drillock" <mdrillock@COX.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, September 11, 2011 6:25 AM
Subject: Re: Headlight Upgrade Eilemma

> As I said in my original post.
>
>
>> ...............
>>
>> The error with regard to the high beam current route probably arises
>> from the fact that a second current path exists feeding the hi/lo
>> selector switch. This second path is active only while the selector
>> switch is held in the up position by the driver and plays no active role
>> during either high or low beam operation otherwise.
>>
>> Mark
>>
>>