So are you saying this is a very real problem, or is it just that the
other pathway does exist.

John

John Rodgers
Clayartist and Moldmaker
88'GL VW Bus Driver
Chelsea, AL
Http://www.moldhaus.com

On 9/11/2011 8:25 AM, mark drillock wrote:
> As I said in my original post.
>
>
>> ...............
>>
>> The error with regard to the high beam current route probably arises
>> from the fact that a second current path exists feeding the hi/lo
>> selector switch. This second path is active only while the selector
>> switch is held in the up position by the driver and plays no active role
>> during either high or low beam operation otherwise.
>>
>> Mark
>>
>>
>
>