I removed all the handles/moulding and done plenty of sanding, replace
pass,and sliding door,rear hatch had two panels cut out and replaced
pass.side pulled out it appears the po put it on its side. It started as a$
200 purchase

Velma 82diesel 1.6 na westy

On Sep 29, 2011 10:13 PM, "Bruce Todd" <beeceetee@gmail.com> wrote:

Troy -

Seems kind of in the ball park if you have some good West Coast rust - my
parts ended up costing me $2,650...full door and window seals, mats,
carpets, propane tank, gutter trim, bumper end caps, bumper strip, decals,
odds and ends, shipping, taxes etc.  Rust repair $2,500.  WaxOyl treatment &
cabinetry removal & replacement $1,200.   Paint & prep $6,200 - paint taken
down to bare metal.

I didn't lift a finger - and paid for it.  My van was about a 6 out of 10 in
terms of rust.

Here is the story...

https://picasaweb.google.com/Beeceetee/BodyWork?authkey=Gv1sRgCPirocyt7KDP0AE
#

https://picasaweb.google.com/Beeceetee/ThePaintIsOff?authkey=Gv1sRgCP7946ze4Y3nBw
#

https://picasaweb.google.com/Beeceetee/MoreBodyWork?authkey=Gv1sRgCNCOkM6g2tmCNQ
#

https://picasaweb.google.com/Beeceetee/Primer?authkey=Gv1sRgCMuyqffF68mjfA#

https://picasaweb.google.com/Beeceetee/Paint?authkey=Gv1sRgCKyO65qn8qb_-AE#

https://picasaweb.google.com/Beeceetee/Mar52011PaintedRoadWorthy?authkey=Gv1sRgCLG_7u7N1uXQeg
#

Anyway - this was my experience.

BT

On Thu, Sep 29, 2011 at 4:41 PM, Troy <colorworks@gci.net> wrote:

> I just got back from the body ...