Hmmm, pretty sure Bentley said fuse position 13 for the blower and
rear defrost is 30A.  I will double check that and check the owners
manual as well.  Mine is an '86 Wolfsburg.

Thanks to David, and John for the photos.  I see you drilled the
whole to the right of the rib rather than the left as in the original
Mullendore.  I think this is better and read some on the samba to the
same effect.  Also read that the motor is at an upward angle from the
hole so I'll look some more.

Edward

At 11:41 PM 10/4/2011, David Beierl wrote:
>At 08:57 PM 10/4/2011, Edward Maglott wrote:
>>I found my once squealing heater was not working at all and it's fuse
>>was blown.  It had a 25A fuse, which was supposed to be 30 according
>>to Bentley.  I put in a 30A and it is back running but I wanted to do
>>the Mullendore port lubrication.
>
>On a 2.1l that ought to be a 20 amp fuse, pretty sure.  On a 1.9l
>prolly a 16 amp?
>
>>  I drilled the hole as specified and
>>got a light in there through the big air inlet opening but I do not
>>see the motor.  It is supposed to be straight back?  If I look
>>straight back I see a rectangular opening that looks like it might be
>>about 5" wide and 2" tall.
>
>Look to the left of that opening, and closer to you.
>
>Yours,
>David