Hi all.

The primary pipes I originally made finally died. (no mystery) Got a
slightly used '02 - '03 Jetta downpipe for $50. Image:

http://tinyurl.com/bm3pq3m

Part or all of elbow removed, it should fit fairly easily to old work.
Mock up image: http://tinyurl.com/d6f5oc5

Downpipe was a "warranty" return. Buyer claimed cat caused emissions
testing fail. He may have been wrong. Cat element *looks* clear.
So.....

Looking at LH end of cat, image: http://tinyurl.com/bm3pq3m  ) is it
shaped this way to accommodate shape of vehicle it was originally
intended for? If not, if I turn this cat, will the reversed flow, and
this different shape, cause the cat to not operate properly?

And.....

If I mount this cat in place of this flex bushing:
http://tinyurl.com/cxcbvzs and install a new flex bushing post cat pre
90˚ turn to muffler or inline with muffler, will the cat then be
allowed to vibrate freely between the two new flex bushings causing
the bushing(s) to fail prematurely?

TIA for this Friday indulgence,

Neil.

--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines