Dear rolls Royce person

My next door neighbour and mechanical mentor has a set of those interesting
wrenches
just in case ...???
regards

On Tuesday, December 20, 2011, Mike Miller <mwmiller6@att.net> wrote:
> And how about Whitworth?
>
>
> On Dec 20, 2011, at 8:33 AM, Dennis Haynes wrote:
>
>> Metric as applied to fasteners covers a lot of territory. Multiple
>> standards such as DIN, JASO, ISO all with different threads, heads,
>> finishes etc. Many vehicles use more than one standard depending on
>> the part. there are still vehicles that use variations of metric and
>> American.
>>
>> Dennis
>>
>>
>>> Date: Tue, 20 Dec 2011 04:01:35 -0800
>>> From: vwdash80@YAHOO.COM
>>> Subject: Re: nuts/bolts
>>> To: vanagon@GERRY.VANAGON.COM
>>>
>>> now that most manufacturers are world market I would expect metric
>>> to be more common than SAE. all of Detroit outsources components
>>> and subassemblies from beyond the states ...
>>>
>>> ----- Original Message -----
>>> From: Dennis Haynes <d23haynes57@HOTMAIL.COM>
>>> To: vanagon@GERRY.VANAGON.COM
>>> Cc:
>>> Sent: Monday, December 19, 2011 11:02 PM
>>> Subject: Re: nuts/bolts
>>>
>>> Almost all VW hardware conforms to DIN specifications and with some
>>> effort
>>> is readily available. Depending on application you need to be aware
>>> of not
>