The best way I have found to seal the housing without metal clips is to drill the plastic tabs around the perimeter and fasten the halves with zip ties. 

You just make a lot of future work by gluing it. 

Jim

On Dec 27, 2011, at 4:19 PM, MICHAEL H <vwdash80@YAHOO.COM> wrote:

> you'll probably have to glue the box together after the new motor is installed. or, spend more money on spring steel clips. you may be able to fab new seals with house left overs ...        actually trying to help , mike 
> 
> 
> 
> ________________________________
> From: J Stewart <fonman4277@COMCAST.NET>
> To: vanagon@GERRY.VANAGON.COM 
> Sent: Tuesday, December 27, 2011 10:25 AM
> Subject: Decisions, Decisions, Now WHICH Front Blower Motor To Buy?
> 
> OK, thanks for all the responses, now I have started shopping, and am more confused. Bus Depot has two blower motors, one for $59.00 and one for $156.00. The $59.00 one is Meyle brand while the more expensive one is AEG. Van Cafe sells either Febi/Bilstein or Dansk (i'm assuming they ship whichever one they have in stock) also for $59.00. I haven't checked any others yet (Ken, which one do you sell?) but I am well aware of the old saying "You get what you pay for", but is the $156.00 one really that much better? I guess I'm a bit bummed, because this is the year I was finally going to get heated gloves so I could ride my motorcycle in winter and not have to unfreeze my hands from the grips. Heated gloves are, well, right around $160.00. FWIW, we took the Vanagon down to Charlottesville, VA. yesterday (about a 200 mile round trip) and even without a front heater motor my wife and daughter kept telling me to turn down the heat (just had the rear one going)
> But yesterday was on the mild side as well. However, I do get a lot of whistling from the dash area too, so obviously the front seals are shot as well. 
> 
> 
> 
> 
> Jeff Stewart