Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: 2002 Passat wheels
From:Dennis Haynes
Date:Sun, 22 Jan 2012 10:08:18 -0500

Sorry about that? I meant with!
FWIW an empty Syncro Westy tips the scales just above 3950. 

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Chris S.
Sent: Sunday, January 22, 2012 9:22 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: 2002 Passat wheels

You said 5000 lbs PLUS load. Just checking. 

Chris.

Wysłane z iPhone'a

Dnia Jan 21, 2012 o godz. 16:10 Dennis Haynes <d23haynes57@hotmail.com> napisał(a):

> Add seven adults plus luggage!
> 
> Tires and wheels need to support the gross vehicle weight rating. Check the sticker on the driver's side door jam.
> 
> Dennis
> 
> -----Original Message-----
> From: Chris S. [mailto:szpejankowski@gmail.com]
> Sent: Saturday, January 21, 2012 3:38 PM
> To: Dennis Haynes
> Cc: vanagon@GERRY.VANAGON.COM
> Subject: Re: 2002 Passat wheels
> 
> What manner of Vanagon weighs 5000lbs?  Passenger model of 91 vintage lists at 3460 curb weight. 
> 
> Chris.
> 
> Wysłane z iPhone'a
> 
> Dnia Jan 21, 2012 o godz. 15:09 Dennis Haynes <d23haynes57@HOTMAIL.COM> napisał(a):
> 
>> One should also consider the load rating. They probably are not intended for a 5,000 pound plus load with large diameter tires. 
>> 
>> Dennis
>> 
>> -----Original Message-----
>> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Chris S.
>> Sent: Saturday, January 21, 2012 1:12 PM
>> To: vanagon@GERRY.VANAGON.COM
>> Subject: Re: 2002 passat wheels
>> 
>> Center bore is too small and ET is too large.  You will likely have to use 15mm spacers or thicker to clear upper ballpoints. 
>> 
>> Chris.
>> 
>> Wysłane z iPhone'a
>> 
>> Dnia Jan 21, 2012 o godz. 10:51 marc rose <mrose1028@GMAIL.COM> napisał(a):
>> 
>>> Found some 2002 passat alloy wheel on CL.  Has anyone had any luck 
>>> putting them on a Vanagon?  I have a 90 Carat.  Looks like the bolts 
>>> holes are right but not sure about the back spacing on the wheel 
>>> centers, spacing stc.......
>>> 
>>> Thanks
>