Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Dished Washer With New CV Joints?
From:pat
Date:Sat, 25 Feb 2012 14:38:23 -0500

Does this washer fit over the axle?
Sometimes those are used to take up slack and prevent the CV joint from
sliding on the axle splines.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of J
Stewart
Sent: Saturday, February 25, 2012 12:55 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Dished Washer With New CV Joints?

Hello All,
Got the last of the old bolts out and the axle is off, new CV joints ready
to go on...kit has a dished washer, and I can't remember what it is for-one
didn't come off with the old joints. I checked Bentley, too, and I don't see
it shown there either. This is a dished washer, NOT the circlip I am talking
about. TIA, Jeff

FWIW, using my old boots, which look good-been burned before by the 6 month
boots that come in these kits.