

| Subject: | Re: '88 Vanagon Cruise Control question |
| From: | Ken Wilford |
| Date: | Mon, 5 Mar 2012 09:31:46 -0500 |
John, actually the cruise control troubleshooting is in the Bentley. It is just a little tricky to find as it doesn't list it in the index at the front of the book. Look on page 27.25 and then it continues on from there for several pages. It is one of the best, step by step, easy to understand and do, troubleshooting guides in the Bentley manual. Usually I find that the problem is that one of the front vacuum switches at the pedals is out of adjustment. Check it with a vacuum tester and if it doesn't hold vacuum then adjust it until it does and you are golden. If you can't get the switch to seal, pop it apart, lube up the seal with some vasoline, and this should put you back on line. Let me know if you need any more help or advice. -- Thanks, Ken Wilford John 3:16 www.vanagain.com Phone: 856-327-4936 Fax: 856-327-2242 On 3/5/2012 8:15 AM, John Graham wrote: > My cruise control has 'gone away' and I don't know why yet. There doesn't > seem to be much info in the Bentley manual other than a section in the > electrical wiring diagrams section. > I have an automatic trans and years ago I had to replace the rubber bellows > unit that pulls on the throttle, but that seems to be fine still. > > Is there some sort of troubleshooting guide that I haven't found yet > somewhere? I haven't done any work on the van recently that might have > disturbed any connections that I know of. > > Any guidance or tips would be appreciated. > > John Graham > '88 Westy > Charlotte, NC >
Have something to add on this topic today? Revive this thread in the forum »