The O2 sensor is fine, I replaced that a month or 2 ago and the readings are
normal now. They were not before I got the new one.  I'm going to start the
van now and do some more tests.

Thanks
Bryan

-----Original Message-----
From: Ken Wilford
Sent: Thursday, March 08, 2012 9:53 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Fixing Problems today, help needed.

I don't think the injector reading is a problem.  I have seen this
higher than Bentley spec reading most of the time when testing and the
injectors are fine.  Have you tried running with the oxygen sensor
unplugged yet?

On 3/8/2012 8:40 AM, Bryan Feddish wrote:
> OK, I’m home today to work on this.  I followed Ken’s directions and I’ve
> checked the impedance at the temp sensor and I’ve done all the tests on
> 24.20 of the Bently.  All of the impedances check out, including the temp
> I and II matching ohms, except both fuel injector connections are reading
> 21 ohms instead of 16 like the Bently says.
>
> First question, is the impedance at the injectors a problem and if so what
> do I do to fix it?  Second, is there anything else I should check before I
> start the engine for the day?
>
> Thanks,
> Bryan
>

--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com
Phone: 856-327-4936
Fax: 856-327-2242