The temp 2 sensor and fuel injectors use the same connectors. Cal-Term-08653
works. This connector pigtail also works on the throttle switch and for the
1.9L engines the auxiliary air regulator.  Going to air cooled it fits the
cold start valve. Pulling back boots a paper clip can be used to access the
wires for testing. I don't see why you would need a cut up harness to test
things out.

What are your symptoms? Maybe we could help. The Vanagon fuel injection is
that that complex.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Hector Zapata
Sent: Monday, March 12, 2012 6:49 PM
To: vanagon@GERRY.VANAGON.COM
Subject: WTB: 1986-91 wire harness

I need the harness so I can use the connectors to troubleshoot my Digifant
system, doesn't have to be in great condition since it is going to be cut.
Or, if anybody has the loose connectors already available (with at least a
couple of inches of wire), better yet. I also need the a/c compressor
harness, the longer the better, so I can repair mine. Please email me
off-list.

Thank you,
Hector
1990 Carat 'Ursula'